| Heavy
plate from Four-high mill ('Quarto')
Special mill grades:* |
|
46 Mn7 X 2
51 Mn 7 mod.
CK 60
75 Cr 1
80 CrV 2
74 NiCr 2
|
1.0912
1.5085
1.1221
1.2003
1.2235
1.2703 |
| |
further steel grades by arrangement |
| |
|
Heat treatment:
Tolerances: |
annealed to max. 900 MPa
acc. to DIN EN 10029
|
Chemical analysis / average values
( % ) |
|
| |
C |
Si |
Mn |
Cr |
Ni |
Mo |
V |
| 46 Mn 7 X 2 |
0,45 |
0,45 |
1,80 |
0,25 |
|
|
|
| 51 Mn 7 mod. |
0,50 |
0,20 |
1,10 |
0,45 |
|
|
|
| Ck 60 |
0,60 |
0,20 |
0,70 |
|
|
|
|
| 75 Cr 1 |
0,78 |
0,30 |
0,70 |
0,40 |
|
|
|
| 80 CrV 2 |
0,82 |
0,30 |
0,60 |
|
|
|
0,20 |
| 74 NiCr 2 |
0,70 |
0,30 |
0,50 |
0,40 |
0,80 |
0,08 |
|
|
|
|
|
|
|
|
|
Range of dimensions:
Thickness: |
starting from 4,00 mm |
Width: |
max. 2.500 mm for thickness 4,00 - 4,99
mm
max. 2.800 mm for thickness 5,00 - 5,99 mm
max. 3.000 mm for thickness 6,00 - 6,99 mm
max. 3.200 mm for thickness 7,00 - 7,99 mm
max. 3.400 mm for thickness 8,00 - 8,99 mm
max. 3.500 mm for thickness 9,00 - 9,99 mm
max. 3.600 mm for thickness 10 mm and up
|
| |
| |
| |
| |
| |
*) The chemical compositions of our special
mill grades have been optimized to saw grade pre-material. Please refer
to our chemical analyses.
All statements as to the properties or utilization of the materials and
products
mentioned in this brochure are for the purpose of description only.
Guarantees in respect of the existence of certain properties or utilization
of the material mentioned are only valid if agreed upon in writing.
|
|
| top